Related Products
Csdx145t Specifications, Features & Compatibility Guide
The Kaeser CSDX145T delivers a consistent 348 CFM of compressed air, making it a primary asset for large-scale production facilities requiring a stable 400V three-phase power supply.
Quick Answer
Yes, the Kaeser CSDX145T is an excellent investment for large Indian manufacturing units needing robust, continuous compressed air. Its 75 kW direct-drive system and SIGMA PROFILE air end provide a consistent 348 CFM (13.74–9.86 m³/min), perfect for high-demand plant air supply without efficiency losses. Opt for this model if your facility prioritizes long-term operational savings and unwavering performance over initial low cost.
Choose the Kaeser CSDX145T if your industrial plant demands high-efficiency, consistent air supply for 400V three-phase operations. Avoid this unit if your budget strictly prioritizes initial low capital expenditure over the proven long-term operational savings and reliability it offers.
✓ Who Should Buy
- • performance suitable for residential spaces.
- •Verified efficiency of standard rating for reduced long-term operational costs.
- •Structural stability for consistent cleaning under rigorous use cases.
- •Hardware durability via premium components and advanced technology.
- •Built-in grid protection with Standard power cycle voltage management.
✕ Who Should Avoid
- •Spaces or usage requirements exceeding residential rated capacity.
- •Installations prioritizing minimum capital expenditure over high-efficiency performance.
- •Unstable grid conditions exceeding the functional threshold of Standard power cycle.
- •Environments incompatible with compressors physical and thermal dissipation specs.
Product Overview
The Kaeser CSDX145T delivers a consistent 348 CFM of compressed air, making it a primary asset for large-scale production facilities requiring a stable 400V three-phase power supply. Starting with its 75 kW motor, this model utilizes a direct drive system to power the SIGMA PROFILE air end, ensuring that the 13.74–9.86 m³/min output is produced without the mechanical losses of belt-driven alternatives. At a weight of 2080 kg, this stationary unit is built on an industrial steel frame and includes an integrated moisture separator and an ABT-series refrigeration dryer to maintain air quality. The SIGMA CONTROL2 digital interface provides the operator with real-time alarm indications and pressure switch monitoring, ensuring the continuous run capability does not exceed thermal protection limits. Operating at a moderate 71 dB(A), the CSDX145T balances massive industrial output with acoustic management for indoor plant environments.
Related Products
Engineering Analysis
The engineering logic of the Kaeser CSDX145T centers on the 1:1 direct drive coupling between the 75 kW motor and the rotary screw pump, which eliminates transmission energy waste. By utilizing the SIGMA PROFILE rotor geometry, the pump achieves higher air delivery at lower speeds, contributing to the 13.74 m³/min peak flow rate. The system’s thermal management relies on air-cooling and integrated overpressure protection, allowing the unit to maintain a continuous duty cycle without the risk of heat-induced degradation. The inclusion of a G 2 air outlet port facilitates high-volume distribution, while the 400V/50Hz electrical configuration supports the high torque required for large-scale pneumatic networks. With a noise rating of 71 dB(A), the engineering team has successfully dampened the mechanical resonance of the 75 kW motor through dedicated noise insulation and anti-vibration mounts, making it suitable for floor-mounted installation near production lines.
Technical Support & FAQs
Engineering Analysis
The engineering logic of the Kaeser CSDX145T centers on the 1:1 direct drive coupling between the 75 kW motor and the rotary screw pump, which eliminates transmission energy waste. By utilizing the SIGMA PROFILE rotor geometry, the pump achieves higher air delivery at lower speeds, contributing to the 13.74 m³/min peak flow rate. The system’s thermal management relies on air-cooling and integrated overpressure protection, allowing the unit to maintain a continuous duty cycle without the risk of heat-induced degradation. The inclusion of a G 2 air outlet port facilitates high-volume distribution, while the 400V/50Hz electrical configuration supports the high torque required for large-scale pneumatic networks. With a noise rating of 71 dB(A), the engineering team has successfully dampened the mechanical resonance of the 75 kW motor through dedicated noise insulation and anti-vibration mounts, making it suitable for floor-mounted installation near production lines.