Related Products
Battery Tender 10-Bank Shop Charger: Integrated 4-Stage 1.25A per Bank 12V Precision Charging Station
The Battery Tender 10-Bank Shop Charger delivers a dedicated 1.25A per bank current to manage up to 10 individual 12V batteries simultaneously. Utilizing a microprocessor-controlled 4-stage charging cycle, it ensures safe replenishment for 12V Lead Acid, AGM, and Gel battery chemistries. This professional unit draws a total of 200 Watts of power output and is housed in a durable metal wall mount enclosure for industrial environments. With a supported capacity range of 10-200 Ah, the system effectively incorporates a desulfation mode to recover neglected lead-acid plates.
Quick Answer
The Battery Tender 10-Bank Shop Charger is the ideal professional solution for maintaining up to 10 batteries at once, providing a steady 1.25A per bank output specifically optimized for 12V Lead Acid, AGM, and Gel types within a 10-200 Ah range.
✓10 independent charging banks with 1.25A output per circuit.
✓Sophisticated 4-stage charging logic for optimized battery health.
✓Universal support for 12V Lead Acid, AGM, and Gel chemistries.
✓Built-in desulfation recovery mode for 10-200 Ah capacity units.
✓Rugged metal wall mount chassis designed for shop environments.
The Battery Tender 10-Bank Shop Charger is a professional-grade 1.25A station designed for simultaneous maintenance of multiple 12V batteries using precision 4-stage logic.
✓ Who Should Buy
- •Fleet management facilities
- •Automotive battery retailers
- •Professional workshops servicing 12V AGM or Gel batteries
- •Classic car storage collectors
✕ Who Should Avoid
- •Users requiring high-amperage engine jump-starting
- •Technicians needing integrated alternator diagnostic tools
- •Portable use cases requiring lightweight plastic builds
Product Overview
The Battery Tender 10-Bank Shop Charger is a high-density 12V maintenance solution engineered for professional workshops needing to service up to 10 batteries simultaneously. Each bank provides a regulated 1.25A current, ensuring that 12V Lead Acid, AGM, and Gel batteries are maintained without the risk of overcharging or thermal damage. The system operates on a robust 200 Watt power output profile, allowing for consistent energy delivery across all 10 active charging circuits. Designed for batteries with a broad capacity range of 10-200 Ah, this charger utilizes a sophisticated 4-stage charging process that includes initialization, bulk charge, absorption mode, and float/maintenance stages. The industrial-grade metal wall mount construction provides a rugged footprint for high-traffic environments where floor space is limited. By focusing on a precise 1.25A per bank output, it targets the optimal trickle charge threshold for long-term storage of AGM and Gel cells. While it excludes alternator testing, its specialized desulfation mode specifically addresses plate oxidation in 12V lead-acid units to restore lost capacity across the 10-200 Ah spectrum.
| Brand | Battery Tender |
| Model Name | 10-Bank Shop Charger |
| Model Number | 022-0165-DL-WH |
| Category | N/A |
| Charger Type | Professional Multi Bank Charger |
| Device Compatibility | motorcycle, atv, car, marine |
| Launch Year | 2020 |
| Model Year | 2020 |
| Country Of Origin | USA |
| Manufacturer | Deltran USA LLC |
Related Products
Engineering Analysis
The engineering logic of the Battery Tender 10-Bank Shop Charger centers on its 4-stage microprocessor-controlled charging algorithm designed to maximize the lifespan of 12V batteries. During the initial stage, the 1.25A per bank output initiates a soft start to assess battery state before entering the bulk charging phase where the 200 Watt power capacity is efficiently utilized. The transition from bulk to absorption occurs at precise voltage thresholds, allowing the 12V Lead Acid, AGM, or Gel battery to reach 100% saturation without the risk of thermal runaway. This charger’s desulfation functionality is a critical safety and recovery feature, using high-frequency pulses to break down lead sulfate crystals on plates within the 10-200 Ah capacity range. Unlike standard 12V units, the 1.25A per bank limit prevents the excessive heat generation often found in high-amperage rapid chargers, making it superior for maintaining sensitive AGM and Gel chemistries. The 4-stage trickle charge phase ensures that once the 12V battery is fully charged, the current drops to a maintenance level to offset self-discharge. By distributing the 200 Watts across 10 independent banks, the system maintains electrical isolation between circuits, preventing cross-interference between different 12V battery types. The rugged metal wall mount housing serves as a passive heat sink, maintaining internal component temperatures during 4-stage cycles. Every 1.25A output circuit is protected against short circuits and reverse polarity, ensuring the 10-200 Ah batteries remain protected throughout the multi-stage recovery process.
Technical Support & FAQs
Engineering Analysis
The engineering logic of the Battery Tender 10-Bank Shop Charger centers on its 4-stage microprocessor-controlled charging algorithm designed to maximize the lifespan of 12V batteries. During the initial stage, the 1.25A per bank output initiates a soft start to assess battery state before entering the bulk charging phase where the 200 Watt power capacity is efficiently utilized. The transition from bulk to absorption occurs at precise voltage thresholds, allowing the 12V Lead Acid, AGM, or Gel battery to reach 100% saturation without the risk of thermal runaway. This charger’s desulfation functionality is a critical safety and recovery feature, using high-frequency pulses to break down lead sulfate crystals on plates within the 10-200 Ah capacity range. Unlike standard 12V units, the 1.25A per bank limit prevents the excessive heat generation often found in high-amperage rapid chargers, making it superior for maintaining sensitive AGM and Gel chemistries. The 4-stage trickle charge phase ensures that once the 12V battery is fully charged, the current drops to a maintenance level to offset self-discharge. By distributing the 200 Watts across 10 independent banks, the system maintains electrical isolation between circuits, preventing cross-interference between different 12V battery types. The rugged metal wall mount housing serves as a passive heat sink, maintaining internal component temperatures during 4-stage cycles. Every 1.25A output circuit is protected against short circuits and reverse polarity, ensuring the 10-200 Ah batteries remain protected throughout the multi-stage recovery process.