Related Products
Dxcmv5018055 Specifications, Features & Compatibility Guide
07 bar).0 CFM at 175 PSI, ensuring sufficient volume for multiple 1/4 inch pneumatic tools.19 kg build is anchored by a cast iron two-stage reciprocating pump that utilizes a belt-drive system and oil-lubricated splash technology for heat management.
Quick Answer
The DeWalt DXCMV5018055 is an excellent choice if your Indian industrial facility or large workshop demands robust, continuous high-pressure air. Its 5 HP two-stage pump consistently delivers 17 CFM at 175 PSI, powering multiple heavy-duty tools with superior efficiency. This ensures minimal downtime and reduced long-term operational costs, making it a powerful investment for rigorous applications.
Ideal for Indian industrial setups and large workshops, the DeWalt DXCMV5018055 delivers consistent 175 PSI for heavy-duty tools, prioritizing efficiency and durability. Not for residential use or those choosing minimal upfront cost over long-term, robust performance.
✓ Who Should Buy
- • performance suitable for residential spaces.
- •Verified efficiency of standard rating for reduced long-term operational costs.
- •Structural stability for consistent cleaning under rigorous use cases.
- •Hardware durability via premium components and advanced technology.
- •Built-in grid protection with Standard power cycle voltage management.
✕ Who Should Avoid
- •Spaces or usage requirements exceeding residential rated capacity.
- •Installations prioritizing minimum capital expenditure over high-efficiency performance.
- •Unstable grid conditions exceeding the functional threshold of Standard power cycle.
- •Environments incompatible with compressors physical and thermal dissipation specs.
Product Overview
The DeWalt DXCMV5018055 integrates a 3.73 kW (5 HP) electric induction motor with a 302.83 L vertical tank to sustain a maximum pressure of 175 PSI (12.07 bar). Specifically designed for workshop and industrial air supply, this stationary unit delivers a consistent 17.0 CFM at 175 PSI, ensuring sufficient volume for multiple 1/4 inch pneumatic tools. The 213.19 kg build is anchored by a cast iron two-stage reciprocating pump that utilizes a belt-drive system and oil-lubricated splash technology for heat management. Electrical requirements are strict, necessitating a 230 V AC single-phase 60 Hz connection with a current draw of 20.6–22 A. Standard safety features include an auto-cutoff pressure switch, a pressure relief valve, and thermal protection to prevent motor damage during high-duty cycles. The integrated control panel includes dual quick couplers and clear pressure gauges for immediate monitoring of the 80-gallon receiver's status.
Related Products
Engineering Analysis
The engineering of the DeWalt DXCMV5018055 centers on the efficiency of its two-stage reciprocating pump, which compresses air in two distinct steps to reach 175 PSI, significantly higher than single-stage equivalents. This higher pressure allows the 302.83 L tank to store more air by mass, effectively extending the runtime of tools before the 3.73 kW motor must cycle back on. The belt-drive system isolates the motor from pump vibrations, while the 1725–1750 RPM pump speed is optimized to balance 17.9 CFM airflow with mechanical longevity. Thermal management is achieved via the cast iron pump construction and air-cooled splash lubrication, which is critical when maintaining 17.0 CFM outputs under industrial loads. The TOPS thermal protection system acts as a fail-safe, monitoring the 22 A current draw to prevent winding failure. By utilizing a 230V single-phase configuration, the unit provides industrial-grade performance without requiring three-phase power infrastructure.
Technical Support & FAQs
Engineering Analysis
The engineering of the DeWalt DXCMV5018055 centers on the efficiency of its two-stage reciprocating pump, which compresses air in two distinct steps to reach 175 PSI, significantly higher than single-stage equivalents. This higher pressure allows the 302.83 L tank to store more air by mass, effectively extending the runtime of tools before the 3.73 kW motor must cycle back on. The belt-drive system isolates the motor from pump vibrations, while the 1725–1750 RPM pump speed is optimized to balance 17.9 CFM airflow with mechanical longevity. Thermal management is achieved via the cast iron pump construction and air-cooled splash lubrication, which is critical when maintaining 17.0 CFM outputs under industrial loads. The TOPS thermal protection system acts as a fail-safe, monitoring the 22 A current draw to prevent winding failure. By utilizing a 230V single-phase configuration, the unit provides industrial-grade performance without requiring three-phase power infrastructure.